A. P. Wasch and G. F. Froment, Heat transfer in packed beds, Chemical Engineering Science, vol.27, issue.3, pp.567-576, 1972.
DOI : 10.1016/0009-2509(72)87012-X

G. Froment, Analysis and Design of Fixed Bed Catalytic Reactors, Chem. Reaction Eng, vol.109, pp.1-55, 1972.
DOI : 10.1021/ba-1972-0109.ch001

J. Beek, Design of Packed Catalytic Reactors, Adv. Chem. Eng, vol.3, issue.305, pp.203-271, 1962.
DOI : 10.1016/S0065-2377(08)60060-5

C. Li and B. Finlayson, Heat transfer in packed beds???a reevaluation, Chemical Engineering Science, vol.32, issue.9, pp.1055-1066, 1977.
DOI : 10.1016/0009-2509(77)80143-7

O. Bey and G. Eigenberger, Fluid flow through catalyst filled tubes, Chemical Engineering Science, vol.52, issue.8, pp.1365-1376, 1997.
DOI : 10.1016/S0009-2509(96)00509-X

T. Eppinger, K. Seidler, and M. Kraume, DEM-CFD simulations of fixed bed reactors with small tube to particle diameter ratios, Chemical Engineering Journal, vol.166, issue.1, pp.324-331, 2011.
DOI : 10.1016/j.cej.2010.10.053

M. Behnam, A. Dixon, M. Nijemeisland, and E. Stitt, A new approach to fixed bed radial heat transfer modeling using velocity fields from com- 315 putational fluid dynamics simulations, Ind. Eng. Chem. Res, pp.52-15244, 2013.

A. Dixon, Fixed bed catalytic reactor modelling-the radial heat transfer problem, The Canadian Journal of Chemical Engineering, vol.21, issue.A2, pp.507-527, 2012.
DOI : 10.1002/cjce.21630

J. Papageorgiou and G. Froment, Simulation models accounting for radial voidage profiles in fixed-bed reactors, Chemical Engineering Science, vol.50, issue.19, pp.3043-3056, 1995.
DOI : 10.1016/0009-2509(95)00138-U

M. Winterberg and E. Tsotsas, A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes filled with spheres, Chemical Engineering Science, vol.55, issue.5, pp.55-967, 2000.
DOI : 10.1016/S0009-2509(99)00379-6

M. Winterberg and E. Tsotsas, Correlations for effective heat transport coefficients in beds packed with cylindrical particles, Chemical Engineering Science, vol.55, issue.23, pp.5937-5943, 2000.
DOI : 10.1016/S0009-2509(00)00198-6

D. Vortmeyer and E. Haidegger, Discrimination of three approaches to eval- 330 uate heat fluxes for wall-cooled fixed bed chemical reactors, Chem. Eng. Sci, vol.46, pp.2951-2660, 1991.

E. Smirnov, A. Muzykantov, V. Kuzmin, A. Kronberg, and I. Zolotarskii, Radial heat transfer in packed beds of spheres, cylinders and rashing rings. verification of model with a linear variation of ? er in the vicinity 335 of the wall, Chem Eng. J, pp.91-243, 2003.

D. Bunnell, H. Irvin, R. Olson, and J. Smith, Effective Thermal Conductivities in Gas-Solid Systems, Industrial & Engineering Chemistry, vol.41, issue.9, pp.41-1977, 1949.
DOI : 10.1021/ie50477a033

S. Kwong and J. Smith, Radial Heat Transfer in Packed Beds, Industrial & Engineering Chemistry, vol.49, issue.5, pp.894-903, 1957.
DOI : 10.1021/ie50569a038

M. Ahmed and R. Fahien, Tubular reactor design???I Two dimensional model, Chemical Engineering Science, vol.35, issue.4, pp.889-895, 1980.
DOI : 10.1016/0009-2509(80)85076-7

D. Gunn and M. Ahmed, THE CHARACTERISATION OF RADIAL HEAT TRANSFER IN FIXED BEDS, IChemE Symp. Ser, vol.86, pp.513-520, 1984.
DOI : 10.1016/B978-0-85295-174-3.50047-2

D. Gunn, M. Ahmed, and M. Sabri, Radial heat transfer to fixed beds of particles, Chemical Engineering Science, vol.42, issue.9, pp.2163-2171, 1987.
DOI : 10.1016/0009-2509(87)85037-6

D. Gunn and M. Sabri, A distributed model for liquid-phase heat transfer in fixed beds, International Journal of Heat and Mass Transfer, vol.30, issue.8, pp.1693-1702, 1987.
DOI : 10.1016/0017-9310(87)90315-2

J. Borkink and K. Westerterp, Significance of the radial porosity profile for the description of heat transport in wall-cooled packed beds, Chemical Engineering Science, vol.49, issue.6
DOI : 10.1016/0009-2509(94)80023-5

F. Mathey, Numerical up-scaling approach for the simulation of heat-transfer in randomly packed beds, International Journal of Heat and Mass Transfer, vol.61, pp.451-463, 2013.
DOI : 10.1016/j.ijheatmasstransfer.2012.09.008

J. Lerou and G. , Velocity, temperature and conversion profiles in fixed bed catalytic reactors, Chemical Engineering Science, vol.32, issue.8, pp.853-861, 1977.
DOI : 10.1016/0009-2509(77)80071-7

J. Marivoet, P. Teodoriou, and S. Wajc, Porosity, velocity and temperature profiles in cylindrical packed beds, Chemical Engineering Science, vol.29, issue.8, pp.1836-1840, 1974.
DOI : 10.1016/0009-2509(74)87046-6

D. Vortmeyer and J. Schuster, Evaluation of steady flow profiles in rectangular and circular packed beds by a variational method, Chemical Engineering Science, vol.38, issue.10, pp.38-1691, 1983.
DOI : 10.1016/0009-2509(83)85026-X

O. Kalthoff and D. Vortmeyer, Ignition/extinction phenomena in a wall cooled fixed bed reactor. experiments and model calculations including radial porosity and velocity distributions, Chem. Eng. Sci, pp.35-1637, 1980.

]. I. Thiagalingam, I. Bennaceur, M. Dallet, S. Cadalen, and P. Sagaut, Exact non local expression for the wall heat transfer coefficient in tubular catalytic reactors, International Journal of Heat and Fluid Flow, vol.54, pp.365-97
DOI : 10.1016/j.ijheatfluidflow.2015.03.007
URL : https://hal.archives-ouvertes.fr/hal-01276484

X. Jia, M. Gan, R. Williams, and D. Rhodes, Validation of a digital packing algorithm in predicting powder packing densities, Powder Technology, vol.174, issue.1-2, pp.174-184, 2007.
DOI : 10.1016/j.powtec.2006.10.013

R. Caulkin, A. Ahmad, M. Fairweather, X. Jia, and R. Williams, Digital predictions of complex cylinder packed columns, Computers & Chemical Engineering, vol.33, issue.1, pp.10-21, 2009.
DOI : 10.1016/j.compchemeng.2008.06.001

R. Caulkin, M. Fairweather, X. Jia, and R. Williams, A numerical case study 375 of packed columns, European Symposium on Computer Aided process Engineering, 2005.

X. Jia and R. Williams, A packing algorithm for particles of arbitrary shapes, Powder Technology, vol.120, issue.3, pp.175-186, 2001.
DOI : 10.1016/S0032-5910(01)00268-6

A. Guardo, M. Coussirat, F. Recasens, M. Larrayoz, and X. Escaler, Cfd 380 study on particle-to-fluid heat transfer in fixed bed reactors: convective heat transfer at low and high pressure, Chem. Eng. Sci, pp.61-4341, 2006.

F. Augier, F. Idoux, and J. Delenne, Numerical simulations of transfer and transport properties inside packed beds of spherical particles, Chemical Engineering Science, vol.65, issue.3
DOI : 10.1016/j.ces.2009.09.059

M. Nijemeisland and A. Dixon, Comparison of CFD simulations to experiment for convective heat transfer in a gas???solid fixed bed, Chemical Engineering Journal, vol.82, issue.1-3, pp.231-246, 2001.
DOI : 10.1016/S1385-8947(00)00360-0

T. Atmakidis and E. Y. Kenig, Cfd-based analysis of the wall effect on 390 the pressure drop in packed beds with moderate tube/particle ratios in laminar flow regime, Chem. Eng. J, pp.155-404, 2009.

A. Dixon, G. Walls, H. Stanness, M. Nijemeisland, and E. H. Stitt, Experimental validation of high Reynolds number CFD simulations of heat transfer in a pilot-scale fixed bed tube, Chemical Engineering Journal, vol.200, issue.202, pp.200-344, 2012.
DOI : 10.1016/j.cej.2012.06.065

S. Ookawara, M. Kuroki, D. Street, and K. Ogawa, High-fidelity dem-cfd modeling of packed bed reactors for process intensification, Proceedings of European Congress of Chemical Engineering, 2007.

A. Dixon, M. Nijemeisland, and E. H. Stitt, Systematic mesh development 400 for 3d cfd simulation of fixed beds: Contact points study, Computers Chem. Eng, pp.48-135, 2013.

M. Quintard and S. Whitaker, Transport in ordered and disordered porous media I: The cellular average and the use of weighting functions, Transport in 405 porous media 14, pp.163-177, 1994.
DOI : 10.1007/BF00615199

M. Quintard and S. Whitaker, Transport in ordered and disordered media i: generalized volume averaging, Transport in porous media, pp.14-179, 1994.

W. Gray and P. Lee, On the theorems for local volume averaging of multiphase systems, International Journal of Multiphase Flow, vol.3, issue.4, pp.333-340, 1977.
DOI : 10.1016/0301-9322(77)90013-1

A. Nakayama and F. Kuwahara, A Macroscopic Turbulence Model for Flow in a Porous Medium, Journal of Fluids Engineering, vol.121, issue.2, pp.427-433, 1999.
DOI : 10.1115/1.2822227

M. Chandesris, G. Serre, and P. Sagaut, A macroscopic turbulence model for flow in porous media suited for channel, pipe and rod bundle flows, International Journal of Heat and Mass Transfer, vol.49, issue.15-16, p.415
DOI : 10.1016/j.ijheatmasstransfer.2005.12.013

H. Mickeley, K. Smith, and . Korchak, Fluid flow in packed beds, Chemical Engineering Science, vol.20, issue.3, pp.237-246, 1965.
DOI : 10.1016/0009-2509(65)80034-3

I. Macdonald, M. El-sayed, K. Mow, and F. Dullien, Flow through Porous Media-the Ergun Equation Revisited, Industrial & Engineering Chemistry Fundamentals, vol.18, issue.3, pp.199-420, 1979.
DOI : 10.1021/i160071a001

D. Van-der-merwe and W. Gauvin, Velocity and turbulence measurements of air flow through packed bed, A.I.Ch, E. J, vol.17, pp.519-528, 1971.

A. Dybbs and R. Edwards, A new look at porous media fluid mechanicsdarcy to turbulent, Fund. Trans. Phenom. Porous Media, vol.82, pp.199-425, 1984.

T. Masuoka and Y. Takatsu, Turbulence model for flow through porous media, International Journal of Heat and Mass Transfer, vol.39, issue.13, pp.2803-2809, 1996.
DOI : 10.1016/0017-9310(95)00353-3

M. De-lemos and M. Pedras, Recent Mathematical Models for Turbulent Flow in Saturated Rigid Porous Media, Journal of Fluids Engineering, vol.123, issue.4, pp.935-940, 2002.
DOI : 10.1115/1.1413243

M. Pedras and M. De-lemos, Macroscopic turbulence modeling for incompressible flow through undeformable porous media, International Journal of Heat and Mass Transfer, vol.44, issue.6, pp.1081-1093, 2001.
DOI : 10.1016/S0017-9310(00)00202-7

F. Pinson, O. Gregoire, and O. , k????? Macro-scale modeling of turbulence based on a two scale analysis in porous media, International Journal of Heat and Fluid Flow, vol.27, issue.5, pp.955-966, 2006.
DOI : 10.1016/j.ijheatfluidflow.2006.03.018

S. Ergun, Fluid flow through packed columns, Chem. Eng. Prog, vol.48, pp.89-94, 1952.

F. Mathey, Macroscopic turbulent models for heat and mass transfer in catalyst reactors, AIP Conf. Proc. 1453, 2012.
DOI : 10.1063/1.4711163

P. Cheng and D. Vortmeyer, Transverse thermal dispersion and wall channelling in a packed bed with forced convective flow, Chemical Engineering Science, vol.43, issue.9, pp.2523-2532, 1988.
DOI : 10.1016/0009-2509(88)85186-8

Y. Demirel, R. Sharma, and H. , On the effective heat transfer parameters in a packed bed, International Journal of Heat and Mass Transfer, vol.43, issue.2, pp.327-332, 2000.
DOI : 10.1016/S0017-9310(99)00126-X

A. Dixon, M. Dicostanzo, and B. Soucy, Fluid-phase radial transport in packed beds of low tube-to-particle diameter ratio, International Journal of Heat and Mass Transfer, vol.27, issue.10, pp.1701-1713, 1984.
DOI : 10.1016/0017-9310(84)90153-4

A. Dixon, Heat Transfer in Fixed Beds at Very Low (<4) Tube-to-Particle Diameter Ratio, Industrial & Engineering Chemistry Research, vol.36, issue.8, pp.3053-3064, 1997.
DOI : 10.1021/ie9605950

P. Peters, R. Schiffino, and P. Harriott, Heat transfer in packed-tube reactors, Industrial & Engineering Chemistry Research, vol.27, issue.2, p.460
DOI : 10.1021/ie00074a003

A. Dixon and L. Labua, Wall-to-fluid coefficients for fixed bed heat and mass transfer, International Journal of Heat and Mass Transfer, vol.28, issue.4, pp.879-881, 1985.
DOI : 10.1016/0017-9310(85)90237-6

M. Drouin, O. Grégoire, O. Simonin, and A. Chanoine, Macroscopic modeling of thermal dispersion for turblent flows in channels, Int. J. Heat