B. E. Allman, P. J. Mcmahon, K. A. Nugent, D. Paganin, D. L. Jacobson et al., Imaging: Phase radiography with neutrons, Nature, vol.408, issue.6809, pp.158-15910, 2000.
DOI : 10.1038/35041626

S. Bae, R. Taylor, D. Shapiro, P. Denes, J. Joseph et al., Soft X-ray Ptychographic Imaging and Morphological Quantification of Calcium Silicate Hydrates (C-S-H), Journal of the American Ceramic Society, vol.103, issue.44, pp.4090-4095, 2015.
DOI : 10.1111/jace.13808
URL : https://hal.archives-ouvertes.fr/hal-01484137

S. Brisard, R. S. Chae, I. Bihannic, L. J. Michot, P. Guttmann et al., Morphological quantification of hierarchical geomaterials by X-ray nano-CT bridges the gap from nano to micro length scales, American Mineralogist, vol.97, issue.2-3, pp.480-483, 2012.
DOI : 10.2138/am.2012.3985
URL : https://hal.archives-ouvertes.fr/hal-00722357

J. Calo and P. Hall, The application of small angle scattering techniques to porosity characterization in carbons, Carbon, vol.42, issue.7, pp.1299-1304, 2004.
DOI : 10.1016/j.carbon.2004.01.030

C. Clarkson and R. Bustin, Variation in permeability with lithotype and maceral composition of Cretaceous coals of the Canadian Cordillera, International Journal of Coal Geology, vol.33, issue.2, pp.135-15110, 1997.
DOI : 10.1016/S0166-5162(96)00023-7

S. Deevi and E. Suuberg, Physical changes accompanying drying of western US lignites, Fuel, pp.454-46010, 1987.

S. M. El-soudani and R. M. Pelloux, Influence of inclusion content on fatigue crack, Metallurgical Transactions, vol.2, issue.2, pp.519-53110, 1973.
DOI : 10.1007/BF02648705

R. M. Flores, Coal and coalbed gas, Fueling the future
DOI : 10.1016/b978-0-12-396972-9.00010-0

Y. Fors, F. Jalilehvand, E. D. Risberg, C. Björdal, E. Phillips et al., Sulfur and iron analyses of marine archaeological wood in shipwrecks from the Baltic Sea and Scandinavian waters, Journal of Archaeological Science, vol.39, issue.7, pp.2521-2532, 2012.
DOI : 10.1016/j.jas.2012.03.006

L. Gimenez, S. Robert, F. Suard, and K. Zreik, Automatic reconstruction of 3D building models from scanned 2D floor plans, Automation in Construction, vol.63, pp.48-56, 2016.
DOI : 10.1016/j.autcon.2015.12.008

K. B. Kabir, K. Hein, and S. Bhattacharya, Process modelling of dimethyl ether production from Victorian brown coal???Integrating coal drying, gasification and synthesis processes, Computers & Chemical Engineering, vol.48, pp.96-104, 2013.
DOI : 10.1016/j.compchemeng.2012.08.008

K. Jr and D. V. , The contact angle of water on coal, Colloid. Surface, pp.21-3510, 1987.

K. Klavina, A. Cinis, and A. Zandeckis, Experimental Study on the Effects of Air Velocity, Temperature and Depth on Lowtemperature Bed Drying of Forest Biomass Residue, Energy Procedia, pp.42-48, 2015.

E. H. Lehmann and D. Mannes, Wood investigations by means of radiation transmission techniques, Journal of Cultural Heritage, vol.13, issue.3, pp.35-43, 2012.
DOI : 10.1016/j.culher.2012.03.017

J. R. Lévine, B. Law, R. , and D. , AAPG Studies in Geology, Hydrocarbons from Coal, pp.39-77, 1993.

P. Levitz, Toolbox for 3D imaging and modeling of porous media: Relationship with transport properties, Cement Concrete Res, pp.351-359, 2007.

P. Levitz, V. Tariel, M. Stampanoni, and E. Gallucci, Topology of evolving pore networks, Eur. Phys, J. Appl. Phys, vol.60, pp.10-1051, 2012.
DOI : 10.1051/epjap/2012120156

L. J. Michot, I. Bihannic, F. Thomas, B. S. Lartiges, Y. Waldvogel et al., Coagulation of Na-Montmorillonite by Inorganic Cations at Neutral pH. A Combined Transmission X-ray Microscopy, Small Angle and Wide Angle X-ray Scattering Study, Langmuir, vol.29, issue.10, pp.3500-351010, 1021.
DOI : 10.1021/la400245n
URL : https://hal.archives-ouvertes.fr/hal-01119381

G. P. Odin, V. Rouchon, F. Ott, N. Malikova, P. Levitz et al., Data from: Neutron imaging investigation of fossil woods: non-destructive characterization of microstructure and detection of in situ changes as occurring in museum cabinets, 2017.

T. Ohm, J. Chae, J. Lim, M. , and S. , Evaluation of a hot oil immersion drying method for the upgrading of crushed low-rank coal, Journal of Mechanical Science and Technology, vol.178, issue.4, pp.1299-130310, 2012.
DOI : 10.1007/s12206-012-0210-4

G. N. Okolo, R. C. Everson, H. W. Neomagus, M. J. Roberts, and R. Sakurovs, Comparing the porosity and surface areas of coal as measured by gas adsorption, mercury intrusion and SAXS techniques, Fuel, vol.141, pp.293-304, 2015.
DOI : 10.1016/j.fuel.2014.10.046

S. Parkash and S. Chakrabartty, Microporosity in Alberta Plains coals, Microporosity in Alberta plains coals, pp.55-7010, 1986.
DOI : 10.1016/0166-5162(86)90025-X

P. Perré and I. W. Turner, A heterogeneous wood drying computational model that accounts for material property variation across growth rings, Chemical Engineering Journal, vol.86, issue.1-2, pp.117-13110, 2002.
DOI : 10.1016/S1385-8947(01)00270-4

H. L. Ramandi, P. Mostaghimi, R. T. Armstrong, M. Saadatfar, and W. V. Pinczewski, Micro-CT image calibration to improve fracture aperture measurement, Case Studies in Nondestructive Testing and Evaluation, vol.6, pp.154-155, 2016.
DOI : 10.1016/j.csndt.2016.03.001
URL : http://doi.org/10.1016/j.csndt.2016.03.001

R. Rémond, J. Passard, and P. Perré, The effect of temperature and moisture content on the mechanical behaviour of wood: a comprehensive model applied to drying and bending, European Journal of Mechanics - A/Solids, vol.26, issue.3, pp.558-572, 2007.
DOI : 10.1016/j.euromechsol.2006.09.008

G. Spolek and O. A. Plumb, Capillary pressure in softwoods, Wood Science and Technology, vol.13, issue.11, pp.185-199, 1981.
DOI : 10.1007/BF00353471

M. Ståhl, K. Granström, J. Berghel, R. , and R. , Industrial processes for biomass drying and their effects on the quality properties of wood pellets, Biomass and Bioenergy, vol.27, issue.6, pp.621-628, 2004.
DOI : 10.1016/j.biombioe.2003.08.019

A. Tahmasebi, J. Yu, Y. Hanand, L. , and X. , A study of chemical structure changes of Chinese lignite during fluidized-bed drying in nitrogen and air, Fuel Processing Technology, vol.101, pp.85-93, 2012.
DOI : 10.1016/j.fuproc.2012.04.005

T. Takarada, Y. Tamai, and A. Tomita, Reactivities of 34 coals under steam gasification, Fuel, pp.1438-144210, 1985.

F. Thibeault, D. Marceau, R. Younsiand, and D. Kocaefe, Numerical and experimental validation of thermo-hygro-mechanical behaviour of wood during drying process, International Communications in Heat and Mass Transfer, vol.37, issue.7, pp.756-76010, 2010.
DOI : 10.1016/j.icheatmasstransfer.2010.04.005

S. Toro, P. Sanchez, P. Blanco, E. De-souza-neto, A. Huespe et al., Multiscale formulation for material failure accounting for cohesive cracks at the macro and micro scales, International Journal of Plasticity, vol.76, pp.75-110, 2016.
DOI : 10.1016/j.ijplas.2015.07.001
URL : http://hdl.handle.net/2117/77059

C. R. Ward, Analysis and significance of mineral matter in coal seams, International Journal of Coal Geology, vol.50, issue.1-4, pp.135-16810, 2002.
DOI : 10.1016/S0166-5162(02)00117-9

R. Wei, K. Zhou, L. M. Keer, F. , and Q. , Modeling surface pressure, interfacial stresses and stress intensity factors for layered materials containing multiple cracks and inhomogeneous inclusions under contact loading, Mechanics of Materials, vol.92, pp.8-17, 2016.
DOI : 10.1016/j.mechmat.2015.08.008

K. Wetherall, R. Moss, A. Jones, A. Smith, T. Skinner et al., Sulfur and iron speciation in recently recovered timbers of the Mary Rose revealed via X-ray absorption spectroscopy, Journal of Archaeological Science, vol.35, issue.5, pp.1317-1328, 2008.
DOI : 10.1016/j.jas.2007.09.007

V. Zadin, H. Kasemagi, V. Valdna, S. Vigonski, M. Veske et al., Application of multiphysics and multiscale simulations to optimize industrial wood drying kilns, Applied Mathematics and Computation, vol.267, pp.465-475, 2015.
DOI : 10.1016/j.amc.2015.01.104