Diphosphate coatings for protection of galvanized steel: quality control by impedance measurements - Sorbonne Université
Article Dans Une Revue Journal of Applied Electrochemistry Année : 1984

Diphosphate coatings for protection of galvanized steel: quality control by impedance measurements

Résumé

Galvanized steel surfaces can be protected against corrosion in natural waters by a superficial coating of zinc diphosphate, obtained by the partial oxidation of zinc in a solution containing diphosphate ions. Impedance measurements were used to study the improvement in corrosion protection resulting from this layer and to develop a quality control method. The mechanism of both anodic and cathodic processes remains the same in the presence of the coating as in its absence, so that the relationshipR tIcorr=constant is valid (R t is charge transfer resistance;I corr is intensity of the corrosion current). Thereby, a protection factor, defined as the ratio of the corrosion currents in the absence and in the presence of the coating, can be estimated from the corresponding charge transfer resistances determined experimentally from impedance diagrams. Impedance data obtained on several test-pieces are in good agreement with the coating morphology, as shown by direct scanning electron microscope (SEM) observations, leading to a simple criterion for quality control.

Domaines

Chimie

Dates et versions

hal-04665359 , version 1 (31-07-2024)

Identifiants

Citer

A. Jardy, Robert Rosset, Robert Wiart. Diphosphate coatings for protection of galvanized steel: quality control by impedance measurements. Journal of Applied Electrochemistry, 1984, 14 (4), pp.537-545. ⟨10.1007/BF00610820⟩. ⟨hal-04665359⟩
12 Consultations
0 Téléchargements

Altmetric

Partager

More